Optek Amp Connect1.20.1 - App Store
You'll be able to see results in few seconds.
Publisher Description
The Amp Connect iOS app from Optek allows network technicians to easily connect to FDX amplifiers from CommScope over the Internet and run the necessary commands for setup and calibration from a clean and guided user interface.
Version History User interface improvements and bug fixes. 1.20.1 21h ago Update UI and install flow.
Amp health metrics. 1.20 Sep 15 Bug fix for updating some versions of amp firmware. 1.18.2 Aug 14 Updated amplifier firmware bundle to version 1.3.22 1.18.1 Aug 10 FDX enablement of single amp when installed into FDX-enabled cascade. 1.18 Aug 4 Local connection amp firmware upgrade available for Common Software. 1.17 Jul 15 Update firmware image bundled in app to 1.3.17 1.16.1 Jul 7 Improved amplifier firmware update experience. 1.16.0 Jun 15 ACA Ethernet Firmware Upgrades – Update Golden Image Version from 70.1.16 to 1.3.12 1.15.0 May 22 Amp Swap uses new API.
Improved UI and error messaging for amp firmware update. 1.14.0 May 14 App triggers firmware update over cloud connection when necessary.
-Firmware update when using local (wired) connection now happens in foreground.
-Location can be edited by the user when registering amp.
-Post-calibration reset message changed to allow skipping reset in some scenarios. 1.13.0 Apr 30 DS Profile settings get applied to both North and South ports 1.12.1 Apr 6 Stages firmware upgrade during install process for oldest amplifiers. 1.12.0 Mar 26 Calibration process reads TCP level when cloud-connected. 1.11.1 Jan 7 New Features
- Clearer tech instructions for calibration changes
- App prevents calibration progress is total composite power is above acceptable range
Bug Fixes
- Fixed issue where alert confirming a successful amp registration didn't appear.
- Fixed issue where location sometimes could not be determined when replacing an amp. 1.11 12/17/2025 New Features
- Improved amp name entry screen.
- Email support link for business partners
- Improved process for calibrating derated-dual amplifier
- Improved error-reporting during amp-registration
Bug fixes
- Fixed bug preventing setting attenuation on Line Extender amps running firmware v. 1.x 1.10 12/09/2025 Fixes bug where attenuation settings are not applied correctly when calibrating balanced triple amplifiers. 1.9.3 10/08/2025 -Registration cache & sync: in times of low network connectivity, the app will store amp registrations locally and sync them to the cloud when connectivity is restored
-Amp renaming: amp details screen allows user to edit amp name
-Amp replacement: app flow added for replacement of existing amp
-Improved amp name selection screen 1.9.2 10/01/2025 Resolves calibration issues. 1.9.1 09/16/2025 -Registration cache & sync: in times of low network connectivity, the app will store amp registrations locally and sync them to the cloud when connectivity is restored
- Amp renaming: amp details screen allows user to edit amp name
- Amp replacement: app flow added for replacement of existing amp
- Improved amp name selection screen 1.9 09/15/2025 Introducing the ability to access command and control of amplifiers via the cloud. Networked amps can be calibrated and configured remotely, or with the usual wired connection. 1.8 07/15/2025 Communicate with amplifiers through local GNMI connection.
Fixed bug where attenuation values don't update in app after calibration. 1.7 06/24/2025 Bug fixes for balanced-triple and derated-dual minibridger setup. 1.6.1 06/02/2025 Featuers
- Teams Support Link for Field Technicians
- Login expiration time extended
- Frequency values can be submitted by channel
Issues Resolved
- Balanced triple setup issue resolved 1.6 05/19/2025 Guards against setting frequencies out of amp's range.
Fixes issue of setting power significantly higher than amp's original profile. 1.5 03/24/2025
About Optek Amp Connect
The company that develops Optek Amp Connect is Comcast Cable Communications Management, LLC. The latest version released by its developer is 1.20.1.
To install Optek Amp Connect on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-10-14 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the Optek Amp Connect as malware if the download link is broken.
How to install Optek Amp Connect on your iOS device:
- Click on the Continue To App button on our website. This will redirect you to the App Store.
- Once the Optek Amp Connect is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
- If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
- After Optek Amp Connect is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
- Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.
Program Details
System requirements
Download information
Pricing
Version History
version 1.20.1
posted on 2026-10-14
Version History User interface improvements and bug fixes. 1.20.1 21h ago Update UI and install flow.
Amp health metrics. 1.20 Sep 15 Bug fix for updating some versions of amp firmware. 1.18.2 Aug 14 Updated amplifier firmware bundle to version 1.3.22 1.18.1 Aug 10 FDX enablement of single amp when installed into FDX-enabled cascade. 1.18 Aug 4 Local connection amp firmware upgrade available for Common Software. 1.17 Jul 15 Update firmware image bundled in app to 1.3.17 1.16.1 Jul 7 Improved amplifier firmware update experience. 1.16.0 Jun 15 ACA Ethernet Firmware Upgrades – Update Golden Image Version from 70.1.16 to 1.3.12 1.15.0 May 22 Amp Swap uses new API.
Improved UI and error messaging for amp firmware update. 1.14.0 May 14 App triggers firmware update over cloud connection when necessary.
-Firmware update when using local (wired) connection now happens in foreground.
-Location can be edited by the user when registering amp.
-Post-calibration reset message changed to allow skipping reset in some scenarios. 1.13.0 Apr 30 DS Profile settings get applied to both North and South ports 1.12.1 Apr 6 Stages firmware upgrade during install process for oldest amplifiers. 1.12.0 Mar 26 Calibration process reads TCP level when cloud-connected. 1.11.1 Jan 7 New Features
- Clearer tech instructions for calibration changes
- App prevents calibration progress is total composite power is above acceptable range
Bug Fixes
- Fixed issue where alert confirming a successful amp registration didn't appear.
- Fixed issue where location sometimes could not be determined when replacing an amp. 1.11 12/17/2025 New Features
- Improved amp name entry screen.
- Email support link for business partners
- Improved process for calibrating derated-dual amplifier
- Improved error-reporting during amp-registration
Bug fixes
- Fixed bug preventing setting attenuation on Line Extender amps running firmware v. 1.x 1.10 12/09/2025 Fixes bug where attenuation settings are not applied correctly when calibrating balanced triple amplifiers. 1.9.3 10/08/2025 -Registration cache & sync: in times of low network connectivity, the app will store amp registrations locally and sync them to the cloud when connectivity is restored
-Amp renaming: amp details screen allows user to edit amp name
-Amp replacement: app flow added for replacement of existing amp
-Improved amp name selection screen 1.9.2 10/01/2025 Resolves calibration issues. 1.9.1 09/16/2025 -Registration cache & sync: in times of low network connectivity, the app will store amp registrations locally and sync them to the cloud when connectivity is restored
- Amp renaming: amp details screen allows user to edit amp name
- Amp replacement: app flow added for replacement of existing amp
- Improved amp name selection screen 1.9 09/15/2025 Introducing the ability to access command and control of amplifiers via the cloud. Networked amps can be calibrated and configured remotely, or with the usual wired connection. 1.8 07/15/2025 Communicate with amplifiers through local GNMI connection.
Fixed bug where attenuation values don't update in app after calibration. 1.7 06/24/2025 Bug fixes for balanced-triple and derated-dual minibridger setup. 1.6.1 06/02/2025 Featuers
- Teams Support Link for Field Technicians
- Login expiration time extended
- Frequency values can be submitted by channel
Issues Resolved
- Balanced triple setup issue resolved 1.6 05/19/2025 Guards against setting frequencies out of amp's range.
Fixes issue of setting power significantly higher than amp's original profile. 1.5 03/24/2025
version 1.20
posted on 2026-10-06
Version History Update UI and install flow.
Amp health metrics. 1.20 Sep 15 Bug fix for updating some versions of amp firmware. 1.18.2 Aug 14 Updated amplifier firmware bundle to version 1.3.22 1.18.1 Aug 10 FDX enablement of single amp when installed into FDX-enabled cascade. 1.18 Aug 4 Local connection amp firmware upgrade available for Common Software. 1.17 Jul 15 Update firmware image bundled in app to 1.3.17 1.16.1 Jul 7 Improved amplifier firmware update experience. 1.16.0 Jun 15 ACA Ethernet Firmware Upgrades – Update Golden Image Version from 70.1.16 to 1.3.12 1.15.0 May 22 Amp Swap uses new API.
Improved UI and error messaging for amp firmware update. 1.14.0 May 14 App triggers firmware update over cloud connection when necessary.
-Firmware update when using local (wired) connection now happens in foreground.
-Location can be edited by the user when registering amp.
-Post-calibration reset message changed to allow skipping reset in some scenarios. 1.13.0 Apr 30 DS Profile settings get applied to both North and South ports 1.12.1 Apr 6 Stages firmware upgrade during install process for oldest amplifiers. 1.12.0 Mar 26 Calibration process reads TCP level when cloud-connected. 1.11.1 Jan 7 New Features
- Clearer tech instructions for calibration changes
- App prevents calibration progress is total composite power is above acceptable range
Bug Fixes
- Fixed issue where alert confirming a successful amp registration didn't appear.
- Fixed issue where location sometimes could not be determined when replacing an amp. 1.11 12/17/2025 New Features
- Improved amp name entry screen.
- Email support link for business partners
- Improved process for calibrating derated-dual amplifier
- Improved error-reporting during amp-registration
Bug fixes
- Fixed bug preventing setting attenuation on Line Extender amps running firmware v. 1.x 1.10 12/09/2025 Fixes bug where attenuation settings are not applied correctly when calibrating balanced triple amplifiers. 1.9.3 10/08/2025 -Registration cache & sync: in times of low network connectivity, the app will store amp registrations locally and sync them to the cloud when connectivity is restored
-Amp renaming: amp details screen allows user to edit amp name
-Amp replacement: app flow added for replacement of existing amp
-Improved amp name selection screen 1.9.2 10/01/2025 Resolves calibration issues. 1.9.1 09/16/2025 -Registration cache & sync: in times of low network connectivity, the app will store amp registrations locally and sync them to the cloud when connectivity is restored
- Amp renaming: amp details screen allows user to edit amp name
- Amp replacement: app flow added for replacement of existing amp
- Improved amp name selection screen 1.9 09/15/2025 Introducing the ability to access command and control of amplifiers via the cloud. Networked amps can be calibrated and configured remotely, or with the usual wired connection. 1.8 07/15/2025 Communicate with amplifiers through local GNMI connection.
Fixed bug where attenuation values don't update in app after calibration. 1.7 06/24/2025 Bug fixes for balanced-triple and derated-dual minibridger setup. 1.6.1 06/02/2025 Featuers
- Teams Support Link for Field Technicians
- Login expiration time extended
- Frequency values can be submitted by channel
Issues Resolved
- Balanced triple setup issue resolved 1.6 05/19/2025 Guards against setting frequencies out of amp's range.
Fixes issue of setting power significantly higher than amp's original profile. 1.5 03/24/2025 Setup procedures for derated-dual and balanced-triple amplifiers. 1.4 03/03/2025
version 1.20
posted on 2026-09-19
Version History Update UI and install flow.
Amp health metrics. 1.20 4d ago Bug fix for updating some versions of amp firmware. 1.18.2 Aug 14 Updated amplifier firmware bundle to version 1.3.22 1.18.1 Aug 10 FDX enablement of single amp when installed into FDX-enabled cascade. 1.18 Aug 4 Local connection amp firmware upgrade available for Common Software. 1.17 Jul 15 Update firmware image bundled in app to 1.3.17 1.16.1 Jul 7 Improved amplifier firmware update experience. 1.16.0 Jun 15 ACA Ethernet Firmware Upgrades – Update Golden Image Version from 70.1.16 to 1.3.12 1.15.0 May 22 Amp Swap uses new API.
Improved UI and error messaging for amp firmware update. 1.14.0 May 14 App triggers firmware update over cloud connection when necessary.
-Firmware update when using local (wired) connection now happens in foreground.
-Location can be edited by the user when registering amp.
-Post-calibration reset message changed to allow skipping reset in some scenarios. 1.13.0 Apr 30 DS Profile settings get applied to both North and South ports 1.12.1 Apr 6 Stages firmware upgrade during install process for oldest amplifiers. 1.12.0 Mar 26 Calibration process reads TCP level when cloud-connected. 1.11.1 Jan 7 New Features
- Clearer tech instructions for calibration changes
- App prevents calibration progress is total composite power is above acceptable range
Bug Fixes
- Fixed issue where alert confirming a successful amp registration didn't appear.
- Fixed issue where location sometimes could not be determined when replacing an amp. 1.11 12/17/2025 New Features
- Improved amp name entry screen.
- Email support link for business partners
- Improved process for calibrating derated-dual amplifier
- Improved error-reporting during amp-registration
Bug fixes
- Fixed bug preventing setting attenuation on Line Extender amps running firmware v. 1.x 1.10 12/09/2025 Fixes bug where attenuation settings are not applied correctly when calibrating balanced triple amplifiers. 1.9.3 10/08/2025 -Registration cache & sync: in times of low network connectivity, the app will store amp registrations locally and sync them to the cloud when connectivity is restored
-Amp renaming: amp details screen allows user to edit amp name
-Amp replacement: app flow added for replacement of existing amp
-Improved amp name selection screen 1.9.2 10/01/2025 Resolves calibration issues. 1.9.1 09/16/2025 -Registration cache & sync: in times of low network connectivity, the app will store amp registrations locally and sync them to the cloud when connectivity is restored
- Amp renaming: amp details screen allows user to edit amp name
- Amp replacement: app flow added for replacement of existing amp
- Improved amp name selection screen 1.9 09/15/2025 Introducing the ability to access command and control of amplifiers via the cloud. Networked amps can be calibrated and configured remotely, or with the usual wired connection. 1.8 07/15/2025 Communicate with amplifiers through local GNMI connection.
Fixed bug where attenuation values don't update in app after calibration. 1.7 06/24/2025 Bug fixes for balanced-triple and derated-dual minibridger setup. 1.6.1 06/02/2025 Featuers
- Teams Support Link for Field Technicians
- Login expiration time extended
- Frequency values can be submitted by channel
Issues Resolved
- Balanced triple setup issue resolved 1.6 05/19/2025 Guards against setting frequencies out of amp's range.
Fixes issue of setting power significantly higher than amp's original profile. 1.5 03/24/2025 Setup procedures for derated-dual and balanced-triple amplifiers. 1.4 03/03/2025
version 1.18.2
posted on 2026-09-12
Version History Bug fix for updating some versions of amp firmware. 1.18.2 Aug 14 Updated amplifier firmware bundle to version 1.3.22 1.18.1 Aug 10 FDX enablement of single amp when installed into FDX-enabled cascade. 1.18 Aug 4 Local connection amp firmware upgrade available for Common Software. 1.17 Jul 15 Update firmware image bundled in app to 1.3.17 1.16.1 Jul 7 Improved amplifier firmware update experience. 1.16.0 Jun 15 ACA Ethernet Firmware Upgrades – Update Golden Image Version from 70.1.16 to 1.3.12 1.15.0 May 22 Amp Swap uses new API.
Improved UI and error messaging for amp firmware update. 1.14.0 May 14 App triggers firmware update over cloud connection when necessary.
-Firmware update when using local (wired) connection now happens in foreground.
-Location can be edited by the user when registering amp.
-Post-calibration reset message changed to allow skipping reset in some scenarios. 1.13.0 Apr 30 DS Profile settings get applied to both North and South ports 1.12.1 Apr 6 Stages firmware upgrade during install process for oldest amplifiers. 1.12.0 Mar 26 Calibration process reads TCP level when cloud-connected. 1.11.1 Jan 7 New Features
- Clearer tech instructions for calibration changes
- App prevents calibration progress is total composite power is above acceptable range
Bug Fixes
- Fixed issue where alert confirming a successful amp registration didn't appear.
- Fixed issue where location sometimes could not be determined when replacing an amp. 1.11 12/17/2025 New Features
- Improved amp name entry screen.
- Email support link for business partners
- Improved process for calibrating derated-dual amplifier
- Improved error-reporting during amp-registration
Bug fixes
- Fixed bug preventing setting attenuation on Line Extender amps running firmware v. 1.x 1.10 12/09/2025 Fixes bug where attenuation settings are not applied correctly when calibrating balanced triple amplifiers. 1.9.3 10/08/2025 -Registration cache & sync: in times of low network connectivity, the app will store amp registrations locally and sync them to the cloud when connectivity is restored
-Amp renaming: amp details screen allows user to edit amp name
-Amp replacement: app flow added for replacement of existing amp
-Improved amp name selection screen 1.9.2 10/01/2025 Resolves calibration issues. 1.9.1 09/16/2025 -Registration cache & sync: in times of low network connectivity, the app will store amp registrations locally and sync them to the cloud when connectivity is restored
- Amp renaming: amp details screen allows user to edit amp name
- Amp replacement: app flow added for replacement of existing amp
- Improved amp name selection screen 1.9 09/15/2025 Introducing the ability to access command and control of amplifiers via the cloud. Networked amps can be calibrated and configured remotely, or with the usual wired connection. 1.8 07/15/2025 Communicate with amplifiers through local GNMI connection.
Fixed bug where attenuation values don't update in app after calibration. 1.7 06/24/2025 Bug fixes for balanced-triple and derated-dual minibridger setup. 1.6.1 06/02/2025 Featuers
- Teams Support Link for Field Technicians
- Login expiration time extended
- Frequency values can be submitted by channel
Issues Resolved
- Balanced triple setup issue resolved 1.6 05/19/2025 Guards against setting frequencies out of amp's range.
Fixes issue of setting power significantly higher than amp's original profile. 1.5 03/24/2025 Setup procedures for derated-dual and balanced-triple amplifiers. 1.4 03/03/2025 -Entering MAC address now mandatory for amp registration and calibration
-First calibration step can now be skipped
-Lower and upper channel frequency selections expanded
-Frequency settings adjusted to hit middle of channel 1.3 02/17/2025
version 1.18
posted on 2026-08-06
Version History FDX enablement of single amp when installed into FDX-enabled cascade. 1.18 2d ago Local connection amp firmware upgrade available for Common Software. 1.17 Jul 15 Update firmware image bundled in app to 1.3.17 1.16.1 Jul 7 Improved amplifier firmware update experience. 1.16.0 Jun 15 ACA Ethernet Firmware Upgrades – Update Golden Image Version from 70.1.16 to 1.3.12 1.15.0 May 22 Amp Swap uses new API.
Improved UI and error messaging for amp firmware update. 1.14.0 May 14 App triggers firmware update over cloud connection when necessary.
-Firmware update when using local (wired) connection now happens in foreground.
-Location can be edited by the user when registering amp.
-Post-calibration reset message changed to allow skipping reset in some scenarios. 1.13.0 Apr 30 DS Profile settings get applied to both North and South ports 1.12.1 Apr 6 Stages firmware upgrade during install process for oldest amplifiers. 1.12.0 Mar 26 Calibration process reads TCP level when cloud-connected. 1.11.1 Jan 7 New Features
- Clearer tech instructions for calibration changes
- App prevents calibration progress is total composite power is above acceptable range
Bug Fixes
- Fixed issue where alert confirming a successful amp registration didn't appear.
- Fixed issue where location sometimes could not be determined when replacing an amp. 1.11 12/17/2025 New Features
- Improved amp name entry screen.
- Email support link for business partners
- Improved process for calibrating derated-dual amplifier
- Improved error-reporting during amp-registration
Bug fixes
- Fixed bug preventing setting attenuation on Line Extender amps running firmware v. 1.x 1.10 12/09/2025 Fixes bug where attenuation settings are not applied correctly when calibrating balanced triple amplifiers. 1.9.3 10/08/2025 -Registration cache & sync: in times of low network connectivity, the app will store amp registrations locally and sync them to the cloud when connectivity is restored
-Amp renaming: amp details screen allows user to edit amp name
-Amp replacement: app flow added for replacement of existing amp
-Improved amp name selection screen 1.9.2 10/01/2025 Resolves calibration issues. 1.9.1 09/16/2025 -Registration cache & sync: in times of low network connectivity, the app will store amp registrations locally and sync them to the cloud when connectivity is restored
- Amp renaming: amp details screen allows user to edit amp name
- Amp replacement: app flow added for replacement of existing amp
- Improved amp name selection screen 1.9 09/15/2025 Introducing the ability to access command and control of amplifiers via the cloud. Networked amps can be calibrated and configured remotely, or with the usual wired connection. 1.8 07/15/2025 Communicate with amplifiers through local GNMI connection.
Fixed bug where attenuation values don't update in app after calibration. 1.7 06/24/2025 Bug fixes for balanced-triple and derated-dual minibridger setup. 1.6.1 06/02/2025 Featuers
- Teams Support Link for Field Technicians
- Login expiration time extended
- Frequency values can be submitted by channel
Issues Resolved
- Balanced triple setup issue resolved 1.6 05/19/2025 Guards against setting frequencies out of amp's range.
Fixes issue of setting power significantly higher than amp's original profile. 1.5 03/24/2025 Setup procedures for derated-dual and balanced-triple amplifiers. 1.4 03/03/2025 -Entering MAC address now mandatory for amp registration and calibration
-First calibration step can now be skipped
-Lower and upper channel frequency selections expanded
-Frequency settings adjusted to hit middle of channel 1.3 02/17/2025 Error messages for network unreachability or timeout on network calls. 1.2.1 02/04/2025 Updated calibration process. 1.2 01/23/2025
version 1.17
posted on 2026-07-23
Version History Local connection amp firmware upgrade available for Common Software. 1.17 Jul 15 Update firmware image bundled in app to 1.3.17 1.16.1 Jul 7 Improved amplifier firmware update experience. 1.16.0 Jun 15 ACA Ethernet Firmware Upgrades – Update Golden Image Version from 70.1.16 to 1.3.12 1.15.0 May 22 Amp Swap uses new API.
Improved UI and error messaging for amp firmware update. 1.14.0 May 14 App triggers firmware update over cloud connection when necessary.
-Firmware update when using local (wired) connection now happens in foreground.
-Location can be edited by the user when registering amp.
-Post-calibration reset message changed to allow skipping reset in some scenarios. 1.13.0 Apr 30 DS Profile settings get applied to both North and South ports 1.12.1 Apr 6 Stages firmware upgrade during install process for oldest amplifiers. 1.12.0 Mar 26 Calibration process reads TCP level when cloud-connected. 1.11.1 Jan 7 New Features
- Clearer tech instructions for calibration changes
- App prevents calibration progress is total composite power is above acceptable range
Bug Fixes
- Fixed issue where alert confirming a successful amp registration didn't appear.
- Fixed issue where location sometimes could not be determined when replacing an amp. 1.11 12/17/2025 New Features
- Improved amp name entry screen.
- Email support link for business partners
- Improved process for calibrating derated-dual amplifier
- Improved error-reporting during amp-registration
Bug fixes
- Fixed bug preventing setting attenuation on Line Extender amps running firmware v. 1.x 1.10 12/09/2025 Fixes bug where attenuation settings are not applied correctly when calibrating balanced triple amplifiers. 1.9.3 10/08/2025 -Registration cache & sync: in times of low network connectivity, the app will store amp registrations locally and sync them to the cloud when connectivity is restored
-Amp renaming: amp details screen allows user to edit amp name
-Amp replacement: app flow added for replacement of existing amp
-Improved amp name selection screen 1.9.2 10/01/2025 Resolves calibration issues. 1.9.1 09/16/2025 -Registration cache & sync: in times of low network connectivity, the app will store amp registrations locally and sync them to the cloud when connectivity is restored
- Amp renaming: amp details screen allows user to edit amp name
- Amp replacement: app flow added for replacement of existing amp
- Improved amp name selection screen 1.9 09/15/2025 Introducing the ability to access command and control of amplifiers via the cloud. Networked amps can be calibrated and configured remotely, or with the usual wired connection. 1.8 07/15/2025 Communicate with amplifiers through local GNMI connection.
Fixed bug where attenuation values don't update in app after calibration. 1.7 06/24/2025 Bug fixes for balanced-triple and derated-dual minibridger setup. 1.6.1 06/02/2025 Featuers
- Teams Support Link for Field Technicians
- Login expiration time extended
- Frequency values can be submitted by channel
Issues Resolved
- Balanced triple setup issue resolved 1.6 05/19/2025 Guards against setting frequencies out of amp's range.
Fixes issue of setting power significantly higher than amp's original profile. 1.5 03/24/2025 Setup procedures for derated-dual and balanced-triple amplifiers. 1.4 03/03/2025 -Entering MAC address now mandatory for amp registration and calibration
-First calibration step can now be skipped
-Lower and upper channel frequency selections expanded
-Frequency settings adjusted to hit middle of channel 1.3 02/17/2025 Error messages for network unreachability or timeout on network calls. 1.2.1 02/04/2025 Updated calibration process. 1.2 01/23/2025 Ability to manually input amp name.
Better error messaging.
UI updates 1.1 12/13/2024
version 1.16.0
posted on 2026-07-01
Version History Improved amplifier firmware update experience. 1.16.0 Jun 15 ACA Ethernet Firmware Upgrades – Update Golden Image Version from 70.1.16 to 1.3.12 1.15.0 May 22 Amp Swap uses new API.
Improved UI and error messaging for amp firmware update. 1.14.0 May 14 App triggers firmware update over cloud connection when necessary.
-Firmware update when using local (wired) connection now happens in foreground.
-Location can be edited by the user when registering amp.
-Post-calibration reset message changed to allow skipping reset in some scenarios. 1.13.0 Apr 30 DS Profile settings get applied to both North and South ports 1.12.1 Apr 6 Stages firmware upgrade during install process for oldest amplifiers. 1.12.0 Mar 26 Calibration process reads TCP level when cloud-connected. 1.11.1 Jan 7 New Features
- Clearer tech instructions for calibration changes
- App prevents calibration progress is total composite power is above acceptable range
Bug Fixes
- Fixed issue where alert confirming a successful amp registration didn't appear.
- Fixed issue where location sometimes could not be determined when replacing an amp. 1.11 12/17/2025 New Features
- Improved amp name entry screen.
- Email support link for business partners
- Improved process for calibrating derated-dual amplifier
- Improved error-reporting during amp-registration
Bug fixes
- Fixed bug preventing setting attenuation on Line Extender amps running firmware v. 1.x 1.10 12/09/2025 Fixes bug where attenuation settings are not applied correctly when calibrating balanced triple amplifiers. 1.9.3 10/08/2025 -Registration cache & sync: in times of low network connectivity, the app will store amp registrations locally and sync them to the cloud when connectivity is restored
-Amp renaming: amp details screen allows user to edit amp name
-Amp replacement: app flow added for replacement of existing amp
-Improved amp name selection screen 1.9.2 10/01/2025 Resolves calibration issues. 1.9.1 09/16/2025 -Registration cache & sync: in times of low network connectivity, the app will store amp registrations locally and sync them to the cloud when connectivity is restored
- Amp renaming: amp details screen allows user to edit amp name
- Amp replacement: app flow added for replacement of existing amp
- Improved amp name selection screen 1.9 09/15/2025 Introducing the ability to access command and control of amplifiers via the cloud. Networked amps can be calibrated and configured remotely, or with the usual wired connection. 1.8 07/15/2025 Communicate with amplifiers through local GNMI connection.
Fixed bug where attenuation values don't update in app after calibration. 1.7 06/24/2025 Bug fixes for balanced-triple and derated-dual minibridger setup. 1.6.1 06/02/2025 Featuers
- Teams Support Link for Field Technicians
- Login expiration time extended
- Frequency values can be submitted by channel
Issues Resolved
- Balanced triple setup issue resolved 1.6 05/19/2025 Guards against setting frequencies out of amp's range.
Fixes issue of setting power significantly higher than amp's original profile. 1.5 03/24/2025 Setup procedures for derated-dual and balanced-triple amplifiers. 1.4 03/03/2025 -Entering MAC address now mandatory for amp registration and calibration
-First calibration step can now be skipped
-Lower and upper channel frequency selections expanded
-Frequency settings adjusted to hit middle of channel 1.3 02/17/2025 Error messages for network unreachability or timeout on network calls. 1.2.1 02/04/2025 Updated calibration process. 1.2 01/23/2025 Ability to manually input amp name.
Better error messaging.
UI updates 1.1 12/13/2024 1.0 12/09/2024
version 1.15.0
posted on 2026-06-11
Version History ACA Ethernet Firmware Upgrades – Update Golden Image Version from 70.1.16 to 1.3.12 1.15.0 May 22 Amp Swap uses new API.
Improved UI and error messaging for amp firmware update. 1.14.0 May 14 App triggers firmware update over cloud connection when necessary.
-Firmware update when using local (wired) connection now happens in foreground.
-Location can be edited by the user when registering amp.
-Post-calibration reset message changed to allow skipping reset in some scenarios. 1.13.0 Apr 30 DS Profile settings get applied to both North and South ports 1.12.1 Apr 6 Stages firmware upgrade during install process for oldest amplifiers. 1.12.0 Mar 26 Calibration process reads TCP level when cloud-connected. 1.11.1 Jan 7 New Features
- Clearer tech instructions for calibration changes
- App prevents calibration progress is total composite power is above acceptable range
Bug Fixes
- Fixed issue where alert confirming a successful amp registration didn't appear.
- Fixed issue where location sometimes could not be determined when replacing an amp. 1.11 12/17/2025 New Features
- Improved amp name entry screen.
- Email support link for business partners
- Improved process for calibrating derated-dual amplifier
- Improved error-reporting during amp-registration
Bug fixes
- Fixed bug preventing setting attenuation on Line Extender amps running firmware v. 1.x 1.10 12/09/2025 Fixes bug where attenuation settings are not applied correctly when calibrating balanced triple amplifiers. 1.9.3 10/08/2025 -Registration cache & sync: in times of low network connectivity, the app will store amp registrations locally and sync them to the cloud when connectivity is restored
-Amp renaming: amp details screen allows user to edit amp name
-Amp replacement: app flow added for replacement of existing amp
-Improved amp name selection screen 1.9.2 10/01/2025 Resolves calibration issues. 1.9.1 09/16/2025 -Registration cache & sync: in times of low network connectivity, the app will store amp registrations locally and sync them to the cloud when connectivity is restored
- Amp renaming: amp details screen allows user to edit amp name
- Amp replacement: app flow added for replacement of existing amp
- Improved amp name selection screen 1.9 09/15/2025 Introducing the ability to access command and control of amplifiers via the cloud. Networked amps can be calibrated and configured remotely, or with the usual wired connection. 1.8 07/15/2025 Communicate with amplifiers through local GNMI connection.
Fixed bug where attenuation values don't update in app after calibration. 1.7 06/24/2025 Bug fixes for balanced-triple and derated-dual minibridger setup. 1.6.1 06/02/2025 Featuers
- Teams Support Link for Field Technicians
- Login expiration time extended
- Frequency values can be submitted by channel
Issues Resolved
- Balanced triple setup issue resolved 1.6 05/19/2025 Guards against setting frequencies out of amp's range.
Fixes issue of setting power significantly higher than amp's original profile. 1.5 03/24/2025 Setup procedures for derated-dual and balanced-triple amplifiers. 1.4 03/03/2025 -Entering MAC address now mandatory for amp registration and calibration
-First calibration step can now be skipped
-Lower and upper channel frequency selections expanded
-Frequency settings adjusted to hit middle of channel 1.3 02/17/2025 Error messages for network unreachability or timeout on network calls. 1.2.1 02/04/2025 Updated calibration process. 1.2 01/23/2025 Ability to manually input amp name.
Better error messaging.
UI updates 1.1 12/13/2024 1.0 12/09/2024
version 1.13.0
posted on 2026-05-09
Version History App triggers firmware update over cloud connection when necessary.
-Firmware update when using local (wired) connection now happens in foreground.
-Location can be edited by the user when registering amp.
-Post-calibration reset message changed to allow skipping reset in some scenarios. 1.13.0 Apr 30 DS Profile settings get applied to both North and South ports 1.12.1 Apr 6 Stages firmware upgrade during install process for oldest amplifiers. 1.12.0 Mar 26 Calibration process reads TCP level when cloud-connected. 1.11.1 Jan 7 New Features
- Clearer tech instructions for calibration changes
- App prevents calibration progress is total composite power is above acceptable range
Bug Fixes
- Fixed issue where alert confirming a successful amp registration didn't appear.
- Fixed issue where location sometimes could not be determined when replacing an amp. 1.11 12/17/2025 New Features
- Improved amp name entry screen.
- Email support link for business partners
- Improved process for calibrating derated-dual amplifier
- Improved error-reporting during amp-registration
Bug fixes
- Fixed bug preventing setting attenuation on Line Extender amps running firmware v. 1.x 1.10 12/09/2025 Fixes bug where attenuation settings are not applied correctly when calibrating balanced triple amplifiers. 1.9.3 10/08/2025 -Registration cache & sync: in times of low network connectivity, the app will store amp registrations locally and sync them to the cloud when connectivity is restored
-Amp renaming: amp details screen allows user to edit amp name
-Amp replacement: app flow added for replacement of existing amp
-Improved amp name selection screen 1.9.2 10/01/2025 Resolves calibration issues. 1.9.1 09/16/2025 -Registration cache & sync: in times of low network connectivity, the app will store amp registrations locally and sync them to the cloud when connectivity is restored
- Amp renaming: amp details screen allows user to edit amp name
- Amp replacement: app flow added for replacement of existing amp
- Improved amp name selection screen 1.9 09/15/2025 Introducing the ability to access command and control of amplifiers via the cloud. Networked amps can be calibrated and configured remotely, or with the usual wired connection. 1.8 07/15/2025 Communicate with amplifiers through local GNMI connection.
Fixed bug where attenuation values don't update in app after calibration. 1.7 06/24/2025 Bug fixes for balanced-triple and derated-dual minibridger setup. 1.6.1 06/02/2025 Featuers
- Teams Support Link for Field Technicians
- Login expiration time extended
- Frequency values can be submitted by channel
Issues Resolved
- Balanced triple setup issue resolved 1.6 05/19/2025 Guards against setting frequencies out of amp's range.
Fixes issue of setting power significantly higher than amp's original profile. 1.5 03/24/2025 Setup procedures for derated-dual and balanced-triple amplifiers. 1.4 03/03/2025 -Entering MAC address now mandatory for amp registration and calibration
-First calibration step can now be skipped
-Lower and upper channel frequency selections expanded
-Frequency settings adjusted to hit middle of channel 1.3 02/17/2025 Error messages for network unreachability or timeout on network calls. 1.2.1 02/04/2025 Updated calibration process. 1.2 01/23/2025 Ability to manually input amp name.
Better error messaging.
UI updates 1.1 12/13/2024 1.0 12/09/2024
version 1.11.1
posted on 2026-01-07
Calibration process reads TCP level when cloud-connected.
Disclaimer
Official App Store Link
We do not host Optek Amp Connect on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for Optek Amp Connect is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
